Ace RELIANCE Operation Manual page 22

ACE RELIANCE SENSOR OPERATIONS MANUAL
5.9.4 Hold the long nut of the stop block assembly with the 1/ 2 "wrench. Tighten up the short nut of the stop block
assembly using the 9/16" wrench on the short nut. Make sure that the long nut stays in place and the gap between
the instrument head nut and the stop block remains the same (1 / 2 "). (fig 31)
Figure 31
Use the ½" wrench to hold the
long nut in place
5.9.5 Apply petroleum jelly (lip balm) on the instrument head thread (fig 32)
Figure 32
V2.3
Use the 9/16" wrench to
tighten up the stop block
assembly
22 | P a g e