Table of Contents
Advertisement
ACE RELIANCE SENSOR OPERATIONS MANUAL
Figure 24 Ferrule pressed into the head and a masking tape applied
The cone is pushed into the
head of the instrument
5.8 Withdraw the tubing from the gauge and verify that the cone is at least 3/16" over the tubing (fig 25)
Figure 25
5.8 Apply petroleum jelly (lip balm) on the threat at the at the instrument head connection thread (fig 26)
The tape applied next to the cone
to hold it in this location
The cone sits about 3/16"
from the edge of the tune
V2.3
17 |
P a g e
Advertisement
Table of Contents
