Saving Energy - Ricoh Pro C900s Operating Instructions Manual

4. Press [OK].
5. Press the operation switch.
The operation switch indicator goes off.
6. Make sure the operation switch indicator is not lit.
7. Open the front left cover.
8. Turn off the main power switch.
The main power indicator goes out.
9. Close the front left cover.

Saving Energy

This section explains the machine's energy saving functions.
This machine has the following energy saving functions.
Energy Saver
If you do not use the machine for a certain period after an operation, or when you press the [Energy
Saver] key, the display disappears and the machine goes into Energy Saver mode. When you press
the [Energy Saver] key again, the machine returns to the ready condition. The machine uses less
electricity in Energy Saver mode.
You can change the amount of time the machine waits before switching to Energy Saver mode after
copying has finished or the last operation is performed under Energy Saver Timer.
Auto Off
The machine automatically turns itself off when the job is finished, after a certain period of time has
elapsed. This function is called "Auto Off".
You can change the Auto Off time under Auto Off Timer.
• See "System Settings", General Settings Guide.
• The Energy Saver and Auto Off functions will not operate in the following cases:
Turning On/Off the Power
1
45