Ricoh Pro C900s Operating Instructions Manual page 28

Hide thumbs Also See for Pro C900s:

Table of Contents

1. Getting Started

5. Auto Document Feeder (ADF)

Load a stack of originals here. They will be fed automatically one by one.

6. Exposure glass

Place originals here face down.

7. Paper tray (Tray 3, 4)

Load paper here.

8. Front cover (front right /left cover)

Open to access the inside of the machine.

9. Paper tray (Tray 1, 2)

Load paper here.

10. Main power switch

If the machine does not operate after turning on the operation switch, check if the main power switch is turned

on.

11. Suspend/Resume switch

Press to momentarily stop copying. Pressing again resumes the stopped operation.

1. Ventilation holes

Prevent overheating.

2. Earth breakers

Main breaker (top): Cuts the flow of electricity from the main power supply if a current overload occurs.

Heater breaker (bottom): Cuts the flow of electricity to the heater if a current overload occurs.

• p.29 "Control Panel"

• p.41 "Turning On/Off the Power"

BKA008S

Table of Contents