Ricoh Pro C900s Operating Instructions Manual page 20

• If toner or used toner is swallowed, dilute by drinking a large amount of water. Consult a doctor
if necessary.
• Avoid getting toner on your clothes or skin when removing a paper jam or replacing toner. If your
skin comes into contact with toner, wash the affected area thoroughly with soap and water.
• If toner gets on your clothing, wash with cold water. Hot water will set the toner into the fabric and
may make removing the stain impossible.
• Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple
unit. You can trap your fingers if you do not.
• When loading paper, take care not to trap or injure your fingers.
• The inside of this machine gets very hot. To avoid burns, do not touch parts labelled "hot surface".
• The fusing unit also gets very hot. When installing a new fuser oil unit, turn off the machine and
wait until the fusing unit cools before replacing the fuser oil unit.
• To avoid fire and burns, keep the fuser oil unit away from naked flames and other heat sources.
18