Related Manuals for Milwaukee REDLITHIUM L4 CLL, REDLITHIUM L4 CPL
Summary of Contents for Milwaukee REDLITHIUM L4 CLL, REDLITHIUM L4 CPL
- Page 1 OPERATOR'S MANUAL Cat. No. L4 CLL, L4 CPL REDLITHIUM USB CROSS LINE LASER, CROSS LINE & ® PLUMB POINTS LASER WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
Have operating instructions or you feel the work is beyond a damaged charger replaced immediately. your capability; contact Milwaukee Tool or a trained • USE ONLY RECOMMENDED ATTACHMENTS. professional for additional information or training. -
Page 3: Functional Description
FUNCTIONAL DESCRIPTION SYMBOLOGY Volts 1. Laser apertures 2. Laser mode indicator Direct Current 4. Pivot Bracket LASER RADIATION 5. Battery compartment DO NOT STARE INTO BEAM 6. Fuel gauge CLASS 2 LASER PRODUCT 7. Micro adjust 8. USB power outlet Universal Serial Bus (USB) 9. -
Page 4: Specifications
Allow the battery to cool down, the pack is stored for long periods of time at high warm up, or dry out and then reinsert. If the temperatures (over 50°C (120°F)). MILWAUKEE ® problem persists, contact a MILWAUKEE ®... -
Page 5: Operation
2 hours to an for information. appropriate ambient temperature between -10°C to 40°C before turning on the tool. If problem persists, please contact a MILWAUKEE ® To turn on the laser and unlock the pendulum, service facility for support. - Page 6 Laser Level and before exposure to jobsite conditions. See "Accuracy Field Check" for information. Should any deviation from listed product accuracy be found, please contact a MILWAUKEE service facility. ® Failure to do so could result in rejection of warranty claim.
- Page 7 For the Measuring distance of 2 x 10m = 20m, Horizontal Leveling Accuracy the maximum allowable deviation (d) is: 20m x A free measuring space of approximately 10m (33') ±3.18mm ÷ 10m = ±6.36mm x 10m (33') on a firm surface between two walls or Thus, the difference d between points I and III structures A and B is required for the check.
-
Page 8: Maintenance
MAINTENANCE The maximum vertical deviation (d) is: d max = 2X H (door opening) x ±3.18mm ÷ 10m To reduce the risk of injury, always WARNING Example: for a door opening height of 2.05m, the remove the battery before perform- maximum permitted deviation (d) is: ing any maintenance. - Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the REDLITHIUM L4 CLL, REDLITHIUM L4 CPL and is the answer not in the manual?
Questions and answers
When I turn on the laser it's flashes red then green and turns off . I have just purchased a new battery and it's still doing the same thing. I charged up the battery once I received it and that was ok.
If the Milwaukee L4 CLL or L4 CPL laser flashes red then green and turns off, it indicates a low battery. The laser beams will blink quickly 3 times, followed by 4 seconds of solid on (repeating). This means the battery needs to be charged.
This answer is automatically generated