Storage And Transportation - Mitsubishi Electric MS-T Series Instruction Manual

2. Storage and Transportation

CAUTION
(1) Storage and transportation
The ambient temperature/humidity when storing or transporting the product must be between –30C
and 65C / between 45% and 85%RH. The normal working conditions must be established before use.
 Packing and storing
Do not place the product directly on a concrete floor, etc. Always place it on slats or a shelf.
Do not store the product exposed without packaging.
 Avoid humidity
Do not leave the product for long periods in a place with a high humidity level.
 Avoid corrosive gases
Do not leave the product in an atmosphere containing sulfuric gas, ammonium gas or chloric gas.
(2) Precautions for transportation
 Carefully pack and transport.
Do not drop the product during transportation.
When transporting the product after mounting and wiring it to a panel, pack it carefully. The movable
parts do not need to be locked during transportation.
 Do not hold by terminals or wires when transporting.
Holding by terminals, thermal overload relays or wires, etc., when transporting the product could lead
to damage or dropping.
(3) Long-term storage after mounting and before usage
After completing the product as a panel, the power might not be turned on over a long period. If the
product is delivered during construction, cement, concrete and water, etc., can enter the product.
In this case, always protect the product until it is to be used.
6
 Take caution to injuries from the edges of the packaging material or the product, or
from dropping the product.
 Confirm that no parts have fallen off or been damaged due to accidents during
transportation.
 After unpacking the product, do not leave it in a humid or dusty place.
 Do not stand/sit on or place objects on the product.