Back-Panel Connectors Ps/2 Keyboard & Ps/2 Mouse Connectors; Usb0/Usb1 Port Connectors; Lan Connector; Com1 Connector - Shuttle Spacewalker FE22 User Manual

Intel 810 family based main board
Table of Contents

Advertisement

# # # # #
Back-Panel Connectors
PS/2 Keyboard & PS/2 Mouse Connectors
B1
Two 6-pin female PS/2 keyboard & Mouse
connectors are located at the rear panel
of mainboard. Depending on the com-
puter housing you use (desktop or
minitower), the PS/2 Mouse connector is
situated at the top of the PS/2 Keyboard
connector when the mainboard is laid into
a desktop, as opposed to a minitower
where the PS/2 Mouse connector is lo-
cated at the right of the PS/2 Keyboard.
Plug the PS/2 keyboard and mouse jacks
into their corresponding connectors.

USB0/USB1 Port Connectors

B2
Two female connectors USB0/USB1 share
the same USB (Universal Serial Bus)
bracket at the rear panel of your
mainboard. Plug each USB device jack
into an available USB0/USB1 connector.
B3

LAN Connector

This mainboard can accommodate one
device on LAN.
Attach a RJ45 cable to the LAN port at
the back-panel of your computer.

COM1 Connector

B4
This mainboard can accommodate one
serial device on COM1.
Attach a serial device cable to the DB9
serial port COM1 at the back-panel of
your computer.
PS/2 Mouse
PS/2 keyboard
USB0
LAN Port
- 28 -
USB1
COM1 Port

Advertisement

Table of Contents
loading

Table of Contents