Configuring Sensors And Outputs - Omega IF-006 User Manual

8.8.2

Configuring Sensors and Outputs

When configuring sensors and outputs multiple Sensor or Output Types may be presented. If any of the
'options' related to the Sensor or Output Type are selected the device will be reset to ensure re-
enumeration of the selected type and the remaining options (CLK A, RST etc.) may change.
C S
Sensor Type (0) Options
DIN (option: 0)
>> RATE (option: 1)
WIDTH (option: 2)
DUTY (option: 3)
DELAY (option: 4)
CNT (option: 5)
U/D_CNT (option: 6)
QUAD_CNT (option: 7)
CLK_A
NO/SNK (option: 8)
>> NC/SNK (option: 9)
NO/SRC (option: 10)
NC/SRC (option: 11)
RST
NO/SNK (option: 12)
NC/SNK (option: 13)
>> NO/SRC (option: 14)
NC/SRC (option: 15)
C S 0 = 6
Sensor Type (0) Options
DIN (option: 0)
RATE (option: 1)
WIDTH (option: 2)
DUTY (option: 3)
DELAY (option: 4)
CNT (option: 5)
>> U/D_CNT (option: 6)
QUAD_CNT (option: 7)
CLK_A
NO/SNK (option: 8)
NC/SNK (option: 9)
NO/SRC (option: 10)
NC/SRC (option: 11)
DIR
NO/SNK (option: 12)
NC/SNK (option: 13)
>> NO/SRC (option: 14)
NC/SRC (option: 15)
RST
NO/SNK (option: 16)
NC/SNK (option: 17)
>> NO/SRC (option: 18)
NC/SRC (option: 19)
35 | P a g e