Interface Command - Omega IF-006 User Manual

8.7

Interface Command

The Interface command allows setting and clearing the Force Authentication control bit, changing the Interface
Password, the attached Probe password, enumerating the attached probe and resetting of all passwords.
I ?
I(nterface) <{Add}> <A/a(uthenticate) | U/u(pdate Interface Password) | E(numerate) | R(eset passwords)
P(assword) = ? | I(nterface Password) = ?>
A/a(uthenticate)
U/u(pdate
Interface
Password)
E(numerate)
R(eset Passwords)
P(assword) = ?
I(nterface Passord)
= ?
Interface Option
A – Force Authentication
a - Clear Authentication mode
U – force Interface Password
to match User Password
u – do not force Interface
Password to track User
Password
Causes attached probe to be
enumerated
Similar to Password Reset
trigger command
Allows setting the User
Password on the attached
probe
Allows setting the IF-006
interface password
Usage
When Authentication is enforced probes
will only operate on Omega Devices that
enforce authentication. A factory Reset
will clear the Authentication control bit on
a probe.
If the U option is selected than any
changes entered for the User Password
will be copied to the IPW Interface
password allowing attached probes with
matching passwords to transmit data to
the cloud.
Ensures that an attached probe is
immediately enumerated
.
The 16-character probe User password
prevents unauthorized access to the probe
data. If a probe is locked all accesses will
return 0xff bytes.
When a probe is attached data will only be
accessible to the cloud if the IF-006
interface password matches the attached
probe User password.
31 | P a g e