Pairing If-006 To Layer N Gateway; Reset Pairing - Omega IF-006 User Manual

6 Pairing IF-006 to Layer N Gateway

Important: The IF-006 unit must be in close proximity to the Layer N Gateway during the pairing process. After
pairing, the IF-006 can be moved to its final location.
The IF-006 wirelessly communicates to a Layer N Gateway to send your data to the Layer N Cloud. To pair your IF-006 to a
Layer N Gateway, follow these instructions:
Step 1: Use a Philips screwdriver to remove the 4 screws on
the top cover of your IF-006 unit if you have not already done
so. Push the pairing button once on your IF-006. The LED
Status Indicator will blink green indicating it is
in Pairing Mode.
Step 2: Quickly push the pairing button once on your
Layer N Gateway and the LED on the Gateway will
blink green indicating the Gateway is in Pairing Mode.
When the IF-006 has been successfully paired to your Layer N Gateway the
IF-006 LED will blink amber several times before blinking green once and turning off.
The IF-006 LED will flash a green light each time data is sent to the gateway. Once you
have completed the pairing process, you may use a Philips screwdriver to replace the
cover on your IF-006. Your Smart Probe will appear as a listed device connected to
your Gateway on the Layer N Cloud and can be identified by the MAC Address listed on
the back of the IF-006 unit.
Amber (Solid)
Green (Blinking)
Amber (Blinking)
Red and Green (Blinking) Password Error
Note: The number of measurements displayed on the Layer N Cloud depends on the type of sensor purchased and
the frequency of measurement updates depends on your Layer N Cloud subscription.

Reset Pairing

6.1
To reset the IF-006 and Gateway pairing, hold the pairing button down on the IF-006 until the LED Status Indicator
is blinking Red. Release the button and the LED will return to Solid Amber indicating it is waiting to be paired.
LED Status Indicator
Color
IF-006 powered on; not connected to Gateway
IF-006 in Pairing Mode
IF-006 searching for Gateway
Green (Flash) IF-006 communicating to Gateway
Pairin
g
Status
LED Status
Indicator
11 | P a g e