Configuring Devices - Omega IF-006 User Manual

8.8.1

Configuring Devices

The Config Device command displays a list of different device configurations as shown below. In this
example, there are 7 configurations available (0..6) and currently option #6 is selected as indicated by the
'>>'.
To change the device configuration, enter C D = n, where n is one of the displayed options. The device will be
reconfigured, a 'Reset' will be generated to force the new input selections to be enumerated and a revised
list will be displayed.
C D
BTH-SP Options
T / OUT (option: 0)
H / OUT (option: 1)
T,H / OUT (option: 2)
B / OUT (option: 3)
T,B / OUT (option: 4)
H,B / OUT (option: 5)
>> T,H,B / OUT (option: 6)
C D = 4
BTH-SP Options
T / OUT (option: 0)
H / OUT (option: 1)
T,H / OUT (option: 2)
B / OUT (option: 3)
>> T,B / OUT (option: 4)
H,B / OUT (option: 5)
T,H,B / OUT (option: 6)
34 | P a g e