CONTENTS 1. INTRODUCTION 1.1 AREAS OF USE / INDICATIONS FOR NETTI III EL 1.2 CONTRA INDICATIONS 1.3 QUALITY AND DURABILITY 1.4 THE ENVIRONMENT AND WASTE DISPOSAL 1.5 INFORMATION FOR RE-USE 1.6 ABOUT THIS MANUAL 1.7 VITAL MEASURES 2. QUICK REFERENCE 3.
Page 3
13. TROUBLESHOOTING WHEELCHAIR 14. TESTS & WARRANTY 14.1 TESTS 14.2 WARRANTY 14.3 CLAIM 14.4 NETTI CUSTOMIZED / INDIVIDUAL ADAPTATIONS 14.5 COMBINATIONS WITH OTHER PRODUCTS 14.6 SERVICE AND REPAIR 15. MEASUREMENTS & WEIGHTS Model: Netti III EL Language: English Version: 2021-03...
1. INTRODUCTION Netti III EL is a class B comfort wheelchair with electrical functions meant for both indoor and outdoor use. They are tested to DIN EN 12184:2014. The tests were carried out by TÜV SÜD Product Service GmbH in Germany.
(stabilization), wherever the following functional impediments with The Netti III EL wheelchair is tested at TÜV SÜD Product Service GmbH in Germany, following the their multiple possible causes are present: •...
• Charging point and all connectors • Joystic • Electrical functions of all actuators TEMPERATURE RANGE Netti III EL wheelchair is designed for For hygienic reasons: please replace the head temperature range of -10°C to +40°C. support for a new user.
Using back rest extender gives 600 mm backrest height including back cushion. ** For Netti III EL with seat width 500 mm and more, the overall width exceeds recommended 700 *** Least stable and most stable refers to the positioning of the anti-tippers.
Page 8
Horizontal axle location -10 mm 95 mm Parking brake max slope – 7 ° Minimum turning radius, vertical leg supports R 675 mm 702 mm Model with 24” main wheels. Measured without cushions. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
The content of this page is a summary of the whole manual. It gives you a brief introduction to the use create a warm surface. and care of the Netti III EL wheelchair. Surface temperature of metal parts in frame The quick reference is not a replacement for structure might increase when exposed to the manual, only a reminder / check list.
Therefore, the warnings listed below are recommended to prevent possible interference with the control system of the Netti III EL electrical features. Model: Netti III EL My-Netti.com...
Page 11
Note whether here is a source of EMI nearby. The wheelchair might disturb the operation of devices in its environment that emit electromagnetic fields (e. g. alarm systems of shops, automatic doors etc.) Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
• Electrical actuator for reclining the chair back • Electrical leg support actuators. It is possible to configure Netti III EL with one, two or three electrical functions listed above. Be aware that specifications may vary between countries. If any of these parts are missing, please contact your dealer.
5. FEATURES OF NETTI III EL STANDARD OPTIONS / ACCESSORIES SEAT – NETTI UNO SEAT – UP TO SW 500 MM SEAT NETTI SIT FOR SW 550 – 600 MM • Solid seat plate • Comfort Seat plate up to sw 500 mm •...
The anytime updated complete accessory SEAT CUSHIONS program is found on our web page Many to choose from. www.My-Netti.com – order forms. Please contact your dealer. Not all accessories are available for all wheelchair configurations. Please check the BACK REST CUSHIONS homepage or ask customer service for Many to choose from.
Page 15
HEAD SUPPORTS To be used together with 600 mm back rest cushion. When Support A using Netti III with seat widts Side support also available 500 mm and more as seat in with forehead strap. car, the back rest extender and enforced head support is required.
Page 16
Meant for correction of 90 mm bad postures in the upper 120 mm trunk. For optimal function 250 mm use together with flip backrest. PAD FOR SIDE SUPPORT CORRECTION TOOL SET Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
6.1 MOUNTING OF HIP BELT MAIN WHEELS Available in sizes: 12”, 16”, 20”, 22”, 24” & 26”. All wheels Please see www.My-Netti.com for continuously available 2 widths: 1” and 1 3/8”. Puncture proof updated overview of belts and harnesses and Flexel or PU or pneumatic.
Netti Dynamic System kit is ordered complete or partwise and installed by Alu Rehab. Netti Dynamic System is a modular system that can be customized and adjusted according to the user’s need. THE COMPLETE KIT CONTAINS: •...
Page 19
Before using Netti Dynamic System (NDS) or any of its components, a seating assessment should be carried out by a trained professional. IMPORTANT BENEFITS • The wheelchair adapts to the movements of the user. • The user will have less discomfort during spasm as the wheelchair supports the movement.
Electrical components are mounted by Alu The products are CE-marked and follows EMC Rehab or certified personnel. standard EMC 60601-1-2. Netti III EL is a wheelchair equipped with electrical Weight of components: operation of tilt, recline and leg supports. The Control box with batteries...
Page 21
The actuator socket bracket for the leg supports are fixed on each side of the front cross tube at seating frame. Socket for the leg Leg support support Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
Page 22
Power ON / Off Hand control functions: Recline forward Recline back Tilt forward Tilt back Left leg support up Left leg support down Right leg support up Right leg support down Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
When seating and wheel adjustments are done in or 18 inactive days. Use connect battery the possible positions by standard equipment, the description above to reconnect. adjustments will not exceed safe limits. Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
Front forks come as standard with quick release axles. The front fork is easily removed by pressing the quick release button on top of the bearing house. Check angle of castor bearing house (See chapter 8.5). Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
Readjust the angle of the bearing house (See chapter 8.5). 1 pc 5 mm Allen key. The bearing house can not be height adjusted. Check and adjust the position of the anti-tip if necessary. Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
If the backrest falls forward – repeat the (A long back rest hinge which covers longer seat locking procedure or contact your dealer. depths is available. See chapter 5). Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
Page 27
By using the Velcro adjustment straps in the main wheel in the main wheel bracket chair-back you can gain some mm on the (See chapter 6.6). Adjust anti-tippers depth. accordingly (See chapter 6.10). Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
If the anti-tip is positioned on the outside of the main wheel radius, it will interfere with curbs and stairs. The anti-tip should always be used for the safety of the user. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
The cushion covers are washable and thereby reusable. Follow the instruction on the back of the cushion for correct maintenance and washing of the cushion. Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
• Universal leg support • Amputation leg support • See chapter 5 for pictures. As standard Netti III El is delivered with Angle adjustable leg support. The angle adjustable leg supports are swingable, height adjustable and removable. They come with height and depth adjustable calf supports.
Page 31
• Insert the leg support connector to its socket sitting on the side of the seat frame – one for each leg support. Be aware of squeeze hazard between moving parts. Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
Page 32
For outdoor use, there should be a clearance of 40 – 50 mm between the foot plate and the ground. Never stand on the foot plates due to the risk of tipping forward. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
Page 33
13 mm Allen key. Never stand on the foot plates! When adjusting the leg support angle, be aware of squeeze hazard between moving Never lift the wheelchair by the leg supports. parts. Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
Page 34
• Swing the leg support inwards and push slightly downwards until it goes into locked position. info@solidworks.com info@solidworks.com Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
Page 35
Never stand on the foot plates due to the risk of tipping forward. When adjusting leg support angle, be aware of squeeze hazard between moving parts. works.com Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
Page 36
5 mm Allen key. Never stand on the foot plates! Never lift the wheelchair by the leg supports. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
• For fine adjustment, loosen the upper screw on the inside of the brakes. • Adjust the brake position and tighten the screws. 5 mm Allen key. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
Page 39
Tighten the wire clamp, and Do not leave the user in the wheelchair without activating the parking brake. adjust the foot screw out again. Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
Check the position of anti-tip. When chair back extension is mounted, due to a tall user, the tipping risk increases. If necessary the tipping tendency can be reduced by repositioning the main wheels further back. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
TILT OR RECLINE FEATURES ARE GOING TO BE angle in relation to the surface, and prevent sliding ADJUSTED: of the wheelchair user. The tilt and recline functions of all Netti comfort wheelchair models is a «one hand operation», Tolerance for non-tolerance including the dynamic wheelchair models.
9.7 CREATING MORE INDEPENDENCE A forward tilted seat unit bring you – the user – in a The Netti III EL is often the choice for: position where activities for instance by a table or by • Users with demand on frequent repositioning.
Page 43
Always charge in well tempered, dry, indoor surroundings and keep children, animals and other unskilled persons away from the charger. Max backwards tilt, recline and leg supports lifting Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
REMOVE ACCESSORIES Before using the Netti III as a seat in a car, be sure Netti III El has been crash tested without any to remove and secure all parts and accessories that power assistant device etc.
(tilt + recline + el leg supports) the not When the user is 1.85 m or longer and using electrical function is activated with gas spring(s). Netti III El as a seat in a car, the back extension kit must be mounted. Contrary to general dangerous goods instruction...
EMERGENCY ESCAPE ROUTES: Netti III El with seat width 500 mm and more, has an overall width exceeding 700 mm and may have difficulties passing emergency escape routes.
• Pull the wheelchair up the step and go backwards long enough to put down the front castors on the step. Turn the anti-tip down. Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
The companions should use the strength in their legs carrying the chair, avoiding unnecessary stress on the back. Do not lift the wheelchair holding onto the leg, arm or head supports. Turn the anti-tip down. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
• Pull the wheelchair backwards 50 – 100 mm in order to make the front castors turn forward. • Lock the brakes. • Tilt chair forward. Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
/ or angle of backrest. Never stand on the foot plates due to the risk of tipping the chair forwards. It is recommended to use the anti-tip. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
Never lift the wheelchair with a user in it. 11.10 PUSH RIM Netti wheelchairs are delivered with aluminium push rims as standard. The material and distance to the main wheel influences the ability of the user to grip.
12. MAINTENANCE 12.1 MAINTENANCE INSTRUCTIONS You as a user of the wheelchair (and your NETTI CUSHION CLEANING PROCEDURES attendants and family) are responsible for the everyday maintenance of the chair. Clean CORE it regularly and do the maintenance to ensure safe and long time reliable functions Washing Hand wash 40 º...
SPARE PARTS The Netti chairs are built of modules. Alu Rehab carries stock of all parts and is ready to supply these on short notice. Necessary instructions for mounting will follow the parts.
When in need of spare parts, please contact your dealer. When making changes affecting frame construction, contact dealer / manufacturer for confirmation. Model: Netti III EL My-Netti.com Language: English Version: 2021-03...
Page 55
If the actuator is not working in any other outlets, it is defect and should be returned to the supplier for replacement. The same procedure is to be followed for all the actuators. Troubleshooting for Netti electrical equipment Model: Netti III EL Language: English Version: 2021-03...
14. TESTS & WARRANTY 14.1 TESTS 14.3 CLAIM Netti III and Netti III HD are tested and have been If a product has developed a fault during the approved for usage both indoors and outdoors. warranty period as result of a defect in design or The chairs are CE marked.
Alu Rehab A.S Norway Substitutions or alterations of components from will not be valid. third part suppliers to Netti III El requires the risk evaluation and acceptance of the product If any uncertainty about special fitting and responsibility and safety for use of the wheelchair adaptations, please contact Alu Rehab A.S.
No cushion. Recommended inflation pressure using air tyres is: 60 – 65 PSI. Max user weight is 160 kg for Netti III EL seat width 350 – 600 mm. When used as chair in a car: Max user weight 160 kg.
Page 59
Dealer: Frame number.: Date: Stamp: Model: Netti III EL Language: English Version: 2021-03 My-Netti.com...
Page 60
Manufacturer: Alu Rehab AS Bedriftsvegen 23 N-4353 Klepp Stasjon Norway post@My-Netti.com T: +47 51 78 62 20 my-netti.no Distributor Distributor Distributor Alu Rehab ApS Meyra GmbH MDH Sp. zo.o. Kløftehøj 8 Meyra-Ring 2 ul. W. Tymienieckiego 22/24 DK-8680 Ry D-32689 Kalletal 90-349 tódz...
Need help?
Do you have a question about the GMDN 41620 and is the answer not in the manual?
Questions and answers