System Status Explanation - Renkforce 752168 Operating Instructions Manual

11. System status explanation

The system status is displayed by the status LED "EXIT". An external status LED
(see chapter "7.7 Connection of an External Status LED") can also be connected
to the alarm system. The external status LED has an identical function to the
status LED "EXIT".
Status-LED Meaning
Off System
disarmed
Flashing System armed The system is armed.
quickly
Flashes Entry or
slowly exit delay
active
Explanation
Only the function of the internal door bell is
available. It can be activated by the corres-
pondingly connected button.
This system status is present when the "mode
selection switch" is set to "OFF".
The entry or exit delay is currently active.
47