Connection - Renkforce 752168 Operating Instructions Manual

7. Connection

After successful device installation, you
can now start to connect it. Carefully
take off the connection terminal cover. It
is attached with two screws. After suc-
cessful connection, replace the cover
and re-attach the attachment screws
removed first.
The voltage required for operation is 12 - 16 V/DC at the terminal
clamps 7 (-) and 8 (+).
Observe correct polarity in order not to damage the product!
We recommend to additionally connect a (12 V, 1,2 Ah) lead battery to
maintain operation in case of a power outage.
For this, observe the connection example in chapter: "7.8"!
Activate the operational voltage only after completing all connec-
tions.
35