Operation; Overview Of Operation - Siemens SITRANS DA400 Operating Instructions Manual

Process monitoring with protection against explosion

Hide thumbs Also See for SITRANS DA400:

Table of Contents

Operation

6.1

The following sections provide information about the digital display, the control panel with

keys and the modes. You will learn how you can display measured values and change the

parameters.

If there are references to further information on an aspect described here, these will always

be found at the end of a chapter under "See also'"

Digital display and keys

You can use the control panel and keys to set all modes.

Figure 6-1

Meaning of keys

<MEAS>

<PAR>

<TRA>

<ACK>

SITRANS DA400 with protection against explosion

Operating Instructions, 02/2006, A5E00684661-01

Digital display and keys

Measuring: return to measuring menu

Parameters: call up the parameter menu

Trace: call up the trace menu to display and reset various timers

Acknowledge

In the measurement menu: Acknowledge an alarm that has been set off

6-1

Table of Contents