Features; How To Operate - Inter-m MX-1646D Operation Manual

Features

Features
- 16 CHANNEL INPUTS
8 channel mono microphone (XLR) and line (1/4" PHONE) inputs, 4-channel stereo line (1/4" PHONE, RCA) inputs.
- EQUALIZER
3-band EQ for mono input channels (HIGH: 10kHz / MID: 1.2kHz / LOW: 100Hz), 2-band EQ for stereo input 1/2
channels (HIGH: 10kHz / LOW: 100Hz)
- VARIOUS AUDIO OUTPUTS
MIX(L/R) output, 4 GROUP outputs, 4 AUX outputs, monitor output (L/R), headphone output (L/R)
- DIGITAL EFFECTS
16 kinds of onboard effects including Reverb, Chorus, Delay, etc.
- USB/SD PLAYBACK
Play WAV or MP3 file in the USB memory or SD card.
- AUDIO RECORDING
Record the MIX output sound in the USB memory or SD card as a WAV file.
- PC AUDIO INPUT
Connect a PC audio through the USB-B terminal.
- CONTACT CLOSURE INPUT
Block the audio output (MIX / GROUP / AUX) of the mixer.
- STANDARD RACK MOUNT SIZE
Mounted in a 19-inch standard rack by using the provided rack mount bracket
(set height: 7U; recommended height: 10U)
- TABLE-TYPE ACCESSORIES (MX-16SA)
For the table-type user's convenience, optional accessories such as side bracket, arm rest are provided (sold separately)
※ Caution: Do not connect any other device but USB memory to the USB terminal. It may cause the failure of the mixer.

How to Operate

How to Operate
1. Plug the power cord into the outlet.
2. Adjust all fader volumes on the front panel to the minimum position.
3. When the POWER switch is turned on, the Power LED lights up and the mixer operates.
4. Connect your CD player, microphone, etc. to the INPUT terminal, press the SOLO switch of the channel you want to use,
and adjust the GAIN CONTROL VOLUME and CHANNEL FADER VOLUME while checking the input signal with
headphones. Adjust the volume so that the PEAK indicator does not light up in red.
5. If PHANTOM power is required, press the PHANTOM POWER switch for the channel to supply the PHANTOM power.
Before turning on the PHANTOM power, adjust all the output volumes or faders to the minimum position to avoid very loud
pop that can damage the speaker.
6. To output the signal for each channel, press the channel selection button of your desired channel among GROUPS 1 ~ 4 or
MIX output.
7. Adjust the FADER VOLUME of the channel you want to output. Check the output level with the level meter.
8. While listening to the sound through the monitor output or headphones, use the EQ VOLUME to adjust the output sound
quality as your preference.
PROFESSIONAL AUDIO MIXER
MX-1646D 3