Timer Mode - Grundig Sonoclock 390 Manual

OPERATION
Interrupting the alarm
1
Press »SNOOZE« while the
alarm is sounding.
– The alarm (signal tone or radio)
stops.
– The alarm goes on again
at 9-minute intervals (the
total alarm time is 1 hour, 59
minutes).
Cancelling the alarm for the
day
1
Press »ALARM« while the alarm
is sounding.
– The alarm (signal tone or radio)
stops, but the alarm function re-
mains activated for the next day
at the set time.
Cancelling/activating alarm
stand-by
1
Switch »
by) to cancel the alarm function.
– Display: The » « LED goes out.
– The set alarm time is saved.
2 Switch »
(standby) to » « or » « to acti-
vate the alarm function.
– Display: The » « LED lights up.
20 ENGLISH
_____________________________________
« to » « (stand-
« from » «

Timer mode

The device possesses a sleep timer,
which it switches off in radio mode at
a preset time. It is possible to set the
switch-off time for between 1 minute
and 1 hour 59 minutes.
Switching on the sleep timer
1 Press »SLEEP« to switch on the
device.
– Display: The switch-off time
»0:59« (59 minutes).
– You will hear the selected radio
station.
2
To set the switch-off time, press
and hold down »SLEEP«.
3
Press »HOUR« briefly to extend
the switch-off time to 1 hour 59
minutes (»1:59«).
4
Press »MIN« step-by-step or hold
it down to set the minutes (bet-
ween »59« and »00«).
5
Release »SLEEP« to conclude the
setting.
– After the selected switch-off time
has elapsed, the device swit-
ches off automatically.
Switching off the sleep timer
1
To switch off the sleep timer before
the set time, press »SNOOZE«.
– The device switches off.