probe's directions for use.
Certain ambient environmental conditions, probe application errors, and certain
patient conditions may affect SpO
CAUTION!
The SpO
Do not immerse the probe or patient cables in water, solvents, or cleaning solutions
(the sensors and connections are not waterproof).
Do not use irradiation, steam, or ethylene oxide for sterilization.
Consider the SpO
deoxygenation is indicated, use laboratory instruments to analyze blood samples to
completely understand the patient's condition.
The Following Factors May Lead to Inaccurate Results:
► Excessive ambient light
►
Excessive motion
►
Anemia or low hemoglobin concentrations
►
Fingernail polish
Arterial catheters, blood and infusion lines, etc.
►
Cardiovascular dyes
►
►
Improper sensor use
►
Incorrect sensor
►
Electrosurgical interference
Venous pulsations
►
Infrared Thermometer Warnings
CAUTION!
Always store the thermometer in a cool and dry place: temperatures between -4°F to
140°F (-20°C to 60°C), relative humidity 10% to 85%, non-condensing. Avoid direct
sunlight.
Avoid dropping the thermometer from a height or strongly hitting it with a hard object.
Only use the probe covers provided by the manufacturer. For proper hygiene, do not
share probe cover. Damaged probe cover may result in error display.
Do not disassemble the thermometer.
Basic safety precautions should always be observed, especially when the
thermometer is used on or near children and disabled persons.
This thermometer is not intended to be a substitution for consultation with your
physician.
Keep probe covers out of reach of children.
Temperature of left and right ear may differ. Always measure the same ear.
probe is not intended for use as an apnea monitor.
2
as an early warning monitor. As a trend toward patient
2
readings and pulse signal.
2
4
Need help?
Do you have a question about the VSM100 Pro and is the answer not in the manual?