Page 1
Fingertip Pulse Oximeter Operations & Procedures Manual Long-Term Care and Home Health Care...
Page 3
Thank you for purchasing the FORA TN'G SpO Fingertip Pulse Oximeter. This manual provides important information to help you to use the device properly. Before using this product, please read the following contents thoroughly and carefully. If you have other questions regarding this product, please contact the place of purchase or call Customer Service at 1-888-307-8188.
CLEANING THE OXIMETER MAINTENANCE AND STORAGE TROUBLESHOOTING SPECIFICATIONS TRAINING TOOLS Attachment 1: FORA TN’G SpO Fingertip Pulse Oximeter Training Checklist Attachment 2: FORA TN’G SpO Fingertip Pulse Oximeter Training Quiz Attachment 3: FORA TN’G SpO Fingertip Pulse Oximeter Quality Control Results Record...
Page 5
WARNINGS CAUTIONS ● Do not use the oximeter in an MRI or CT ● The oximeter determines the percentage environment. of arterial oxygen saturation of functional ● The oximeter is not intended for use in the hemoglobin. Significant levels of dysfunctional diagnosis or screening of any symptoms or hemoglobin such as carboxyhemoglobin or diseases. The data measured is for reference methemoglobin may affect the accuracy of the only, do not base a definitive diagnosis on the measurement.
Meter Appearance and Key INTENDED USE Function The Fingertip Pulse Oximeter is indicated for use in measuring oxygen saturation of arterial hemoglobin (SpO ) and pulse rate. It is intended for patients during no-motion condition. The patients are limited to adults with weight above 88 lb.
Battery Replacement OXYGEN SATURATION Make sure the oximeter is off when replacing AND PULSE RATE the batteries. TESTING The oximeter is powered by two 1.5V AAA size alkaline batteries. You can replace new batteries by the following steps. 1. Turn on the oximeter by pressing .
3. After detecting the pulse CLINICAL PERFORMANCE signal, the oximeter shows the readings of SpO pulse rate on the display. Tables below show Arms values measured using The readings will be updated Fingertip Pulse Oximeter in a clinical study. The based on the signal received individual and pooled measured Arms values in with each pulse.
MAINTENANCE AND STORAGE ● Replace the batteries immediately when low voltage indicator is on. ● Clean surface of the Fingertip Oximeter before Difference plot of Fingertip Pulse Oximeter and artery blood gas use. ● Remove the batteries inside the battery compartment if the oximeter will not be operated for a long time.
Display: LCD TROUBLESHOOTING Battery Life: Batteries can be used continuously for 8 hours (for reference only, it depends on different brands Symptom Possible Causes Solutions of AAA alkaline batteries) The batteries are Replace all dead. batteries. The oximeter External Output: Bluetooth cannot be Verify correct The batteries are turned on.
Demonstrates the correct SpO testing procedures using the TN'G SpO Fingertip Pulse Oximeter. Demonstrates the proper cleaning and disinfecting techniques for the FORA TN'G SpO Fingertip Pulse Oximeter. Demonstrates the proper actions to take for inaccurate results. Training Completed by:...
Attachment 2: FORA TN'G SpO Fingertip Pulse Oximeter Training Quiz Complete the following questions to assess your understanding about using the FORA TN'G SpO Fingertip Pulse Oximeter to perform oxygen saturation measurement tests on patients: QUESTIONS ANSWER The FORA TN'G SpO...
Page 16
Distributed by ForaCare, Inc. 893 Patriot Drive, Suite D, Moorpark, CA 93021 USA Products made in Taiwan Toll Free : 1-888-307-8188 (8:30 am - 5:00 pm PST, Mon.-Fri.) www.foracare.com...
Need help?
Do you have a question about the TN'G SpO2 and is the answer not in the manual?
Questions and answers