Fora VSM100 Pro Operator's Manual page 21

 NIBP display area
Measurement unit
5 min of consecutive
Patient population
 Heart rate display area
When the setting is "AUTO",
the "+" will appear
Heart beat source comes from
"NIBP", "SpO " or "ECG"
2
Pulse indicator (It blinks when
heart beat signal is detected)
 Status indicator area
This indicator displays when the symbol is blinking, that the SD memory card slot is
waiting for plug.
This indicator displays when Auto Save function is on. Please refer to page 27.
This indicator displays when Printing function is on. Please refer to page 20.
This indicator displays when Bluetooth is on. Please refer to page 33.
This indicator displays with the "Lighting" symbol constantly shown, which means
the device is recharging.
This indicator displays without the "Lighting" symbol, which means that the device
has been fully recharged.
Battery indicator: the percentage means the power storage capacity
Green: 41%~100% (normal power)
Orange: 21%~40% (low power)
Red: 0%~20% (very low power)
When the bar turns to red, the information signal makes a long sound every 10 seconds (till
the monitor automatically turns off).
Systolic pressure
Mean arterial pressure
Diastolic pressure
Heart rate reading
(beat per minute)
18