Dodge Neon 2001 Service Manual page 682

PL
INPUT CLUTCH ASSEMBLY (Continued)
Fig. 246 Measure OD Clutch Pack Clearance
1 - DIAL INDICATOR
2 - OD/REVERSE REACTION PLATE
(28) Install reverse clutch pack (two frictions/one
steel) (Fig. 247).
Fig. 247 Install Reverse Clutch Pack
1 - REVERSE CLUTCH PLATE
2 - REVERSE CLUTCH DISCS
(29) Install reverse clutch reaction plate with the
flat side down towards reverse clutch (Fig. 248).
(30) Tap reaction plate down to allow installation
of the reverse clutch snap ring. Install reverse clutch
snap ring (Fig. 249).
2001 NEON
41TE AUTOMATIC TRANSAXLE
Fig. 248 Install Reaction Plate
1 - REVERSE CLUTCH REACTION PLATE (FLAT SIDE DOWN)
Fig. 249 Install Reverse Clutch Snap Ring
1 - REVERSE CLUTCH SNAP RING (SELECT)
2 - SCREWDRIVER
3 - REVERSE CLUTCH REACTION PLATE
(31) Pry up reverse reaction plate to seat against
snap ring (Fig. 250).
(32) Set up a dial indicator on the reverse clutch
pack as shown in (Fig. 251).
(33) Using moderate pressure, press down and
hold (near indicator) reverse clutch disc with screw-
driver or suitable tool and zero dial indicator (Fig.
252). When releasing pressure, indicator should
advance 0.005-0.010. as clutch pack relaxes.
(34) Apply 30 psi (206 kPa) air pressure to the
reverse clutch hose on Tool 8391. Measure and record
reverse clutch pack measurement in four (4) places,
90° apart.
21s - 167