Dodge Neon 2001 Service Manual page 624

Hide thumbs Also See for Neon 2001:

Table of Contents

41TE AUTOMATIC TRANSAXLE (Continued)

(42) Install tapered snap ring (with tapered side

out) as shown in (Fig. 121) (Fig. 122).

Fig. 121 Tapered Snap Ring Instructions

Fig. 122 Snap Ring Installed

1 - SCREWDRIVER

2 - TAPERED SNAP RING (INSTALL AS SHOWN)

(43) Set up dial indicator as shown in (Fig. 123) to

measure low/reverse clutch clearance. Press down on

clutch pack with finger and zero dial indicator. Low/

Reverse clutch pack clearance is 0.89-1.47 mm

(0.035-0.058 in.). Select the proper low/reverse reac-

tion plate to achieve specifications:

41TE AUTOMATIC TRANSAXLE

Fig. 123 Check Low/Reverse Clutch Clearance

1 - DIAL INDICATOR

2 - DIAL INDICATOR TIP TOOL 6268

3 - HOOK TOOL

LOW/REVERSE REACTION PLATE CHART

(44) Install 2/4 clutch pack (Fig. 124), staggering

clutch plate pads as shown in (Fig. 125).

Fig. 124 Install 2/4 Clutch Pack

1 - CLUTCH PLATE (4)

2 - CLUTCH DISC (4)

5.88 mm (0.232 in.)

6.14 mm (0.242 in.)

6.40 mm (0.252 in.)

6.66 mm (0.262 in.)

6.92 mm (0.273 in.)

Show Quick Links

Table of Contents