Related Manuals for TCL TRF-210
Summary of Contents for TCL TRF-210
- Page 1 TCL Home Appliances (HeFei) Co., Ltd. Refrigerator Disassembly and Recycling Manual Product model: TRF-210...
- Page 2 Disassembly Guide Guidelines Required tools: 1. A pair of white gloves 2. A Phillips screwdriver 3. A sleeve (size: 8mm) 4. Pincer pliers A pair of white gloves A Phillips A sleeve (size: 8mm) Pincer pliers screwdriver (electric)
- Page 3 Disassembly Guide Disassembly guidelines for refrigerator chamber door 1. First disassemble the 3. Use an 8mm sleeve to 2. Pull the hinge cover upper hinge (the figure loosen three screws of upwards to open shows the appearance of the upper hinge forcefully the upper hinge) 5.
- Page 4 Disassembly Guide Disassembly guidelines for freezer door 1. First disassemble the 2. Use an 8mm sleeve to 3. Remove the bolts with a middle hinge and open loosen two screws of the cross screwdriver the freezer chamber door middle hinge 5.
- Page 5 Disassembly Guide Disassembly of the temperature control lamp assembly 1. Appearance of 2. Use a cross screwdriver to 3. Remove the temperature control remove the screws on the temperature control lamp lamp assembly temperature control lamp assembly by hand 6. Unplug the plug 5.
- Page 6 Disassembly Guide Disassembly of the bottom adjusting foot 2. Use an 8mm sleeve to 1. Appearance of 3. Remove the bolts with a loosen two screws of the bottom adjusting foot cross screwdriver lower hinge 6. Complete the 4. Use a cross screwdriver 5.
- Page 7 Disassembly Guide 1. Prepare to disassemble the 2. Use a cross screwdriver to water tray of the compressor disassemble the screw at one compartment end of the lower water tray 3. Use a cross screwdriver to 4. Remove the water tray of the disassemble the screw at the other compressor compartment end of the lower water tray...
- Page 8 Disassembly Guide Step I: Use pincer pliers to cut off all the high and low pressure pipelines of the compressor chamber; Step II: Use an 8mm sleeve and a Phillips Step III: Use an 8mm sleeve and a Phillips screwdriver to loosen four fixing screws on the screwdriver to remove fixing screws on the bottom of the compressor, and then remove the bottom of the compressor, and finally...