Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD�
InputSignal: HDMI
To use the controls:
1�
Press
to open the main OSD menu�
2�
Use
or
function� If there is a sub-menu, you can move between options using
select that function� Use
3�
Press
4�
Press and hold
the OSD� Press and hold
OSD�
5�
Enables DDC/CI by default. Use OSD Exit Key, Press and hold
enable DDC/CI function� A message "DDC/CI disable" is shown on the screen�
Q27q-1L
Brightness
Contrast
DCR
DisplayMode
Scaling
OverDrive
to move among the icons� Select an icon and press
or
to make adjustments then press
to move backwards through the sub-menus and exit from the OSD�
for 10 seconds to lock the OSD� This will prevent accidental adjustments to
for 10 seconds to unlock the OSD and allow adjustments to the
2560x1440
to access the selected
to save�
or , then press
to
for 10 seconds to disable/
Chapter 2� 2-4