Notice for use
Product overview
Adjusting the tilt
To set up your monitor, please see the illustrations below�
Note: Do not touch the monitor within the screen area� The screen area is glass and can be
damaged by rough handling or excessive pressure�
1� Place your monitor with the screen face down on a soft flat surface.
2� Align the stand assembly bracket to the monitor�
3� Insert the bracket towards monitor until it locks in place�
Note: "Remove the screws from base before detaching base and stand from the monitor�" on page
2-9�
This section will provide information on adjusting monitor positions, setting user controls, and
using the cable lock slot�
Please see the illustration below for an example of the tilt range�
Chapter 1� 1-2