Quick Power On Self Test; Boot Up Numlock Status; Gate A20 Option; Typematic Rate Setting - Biostar G965 Micro 775 Bios Setup Manual

G965 Micro 775
Hyper-Threading Technology
This option allows you to enable or disabled Hyper-Threading Technology.
" Enabled" for Windows
Hyper-Threading Technology). " Disable" for other OS (OS not optimized for
Hyper-Threading Technology).
The Choices: Enabled (default), Disabled.

Quick Power On Self Test

Enabling this option will cause an abridged version o f the Power On Self-Test
(POST) to execute after you power up the computer.
Disabled
Enabled (default)

Boot Up NumLock Status

Selects the NumLock State after the system switched on.
The Choices:
On (default)
Off

Gate A20 Option

Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)

Typematic Rate Setting

When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can
be configured.
The Choices: Disabled (default), Enabled.
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6 (default), 8, 10, 12, 15, 20, 24, 30.
XP and Linux 2.4.x (OS
Normal POST.
Enable quick POST.
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller controls GateA20.
Lets chipset control Gate A20.
13
optimized for