Troubleshooting; Technical Data - AEG BEB331110M User Manual

Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.
The display shows
"12.00".
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. TECHNICAL DATA

13.1 Technical data
Voltage
Frequency
116 ENGLISH
Check if...
The fuse is blown.
There was a power cut.
Set the time of day.
Problem
The lamp does not work.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not remove
the rating plate from the oven cavity.
.........................................
.........................................
.........................................
220 - 240 V
50 Hz
Check if...
The lamp is burnt out.