Set Up The Camera On Reolink App (For Smartphone); Add The Camera To Reolink Client (For Pc) - Reolink Lumus Operational Instruction

Set up the Camera on Reolink App (For Smartphone)

To setup the Reolink camera, please follow the steps below:
1. Download and install the Reolink App on App Store (for iOS) or
Google Play (for Android).
2. Plug the power cable into the power adapter, then into a power outlet, you will hear the voice
prompt a few seconds later.
3. Launch the Reolink App, click the " " button in the top right corner and scan the QR code to add
the camera,then follow the onscreen instructions and camera prompt tones to complete the setup.
3 English
Available on the Get it on
Menu
Add New Device
Enable/Disable PIR Motion
Sensor
(In default, the PIR sensor is
enabled.)
Device Settings
Access the Live View

Add the Camera to Reolink Client (For PC)

After the camera is setup, you can add and manage it using the Reolink client software, please
follow the steps below:
1. Connect your computer to the same router which the camera is connected to.
2. Download and install the Reolink Client software from our official website:
https://reolink.com/software-and-manual
3. Launch the Reolink Client, click "Add Device" on the right, and then choose "Scan Device in LAN".
4. Double click on the camera you want
to add.
NOTICE: If the computer is connected to
another network, please choose "UID" in
the "Register Mode" field and manually
fill in all the information.
5. Input the password created on Reolink
App.
6. Click "OK" to log in.
English 4