Calibrating Foot Pod; Calibrating Power Pod; Timers - Suunto 9 Peak User Manual

Suunto 9 Peak
2. Select Bike POD.
3. Select the new wheel circumference.

4.12.2. Calibrating foot POD

When you pair a foot POD, your watch automatically calibrates the POD using GPS. We
recommend using the automatic calibration, but you can disable it if needed from the POD
settings under Connectivity » Paired devices.
For the first calibration with GPS, you should select a sport mode where the foot POD is used
and the GPS accuracy is set to Best. Start the recording and run at a steady pace on a level
surface, if possible, for at least 15 minutes.
Run at your normal average pace for the initial calibration, and then stop the exercise
recording. The next time you use the foot POD, the calibration is ready.
Your watch automatically re-calibrates the foot POD as needed whenever GPS speed is
available.

4.12.3. Calibrating power POD

For power PODs (power meters), you need to initiate the calibration from the sport mode
options in your watch.
To calibrate a power POD:
1. Pair a power POD with your watch if you have not done so already.
2. Select a sport mode that uses a power POD and then open the mode options.
3. Select Calibrate power POD and follow the instructions in the watch.
You should re-calibrate the power POD from time to time.

4.13. Timers

Your watch includes a stopwatch and countdown timer for basic time measurement. From the
watch face, open the launcher and scroll up until you see the timer icon. Tap the icon or press
the middle button to open the timer display.
When you first enter the display, it shows the stopwatch. After that, it remembers whatever
you used last, stopwatch or countdown timer.
Swipe up or press the lower button to open the SET TIMER shortcuts menu where you can
change the timer settings.
Stopwatch
Start the stopwatch by pressing the middle button.
44