Bluetooth Connectivity; Airplane Mode; Do Not Disturb Mode - Suunto 9 Peak User Manual

Suunto 9 Peak
Buttons off: all events other than pushing buttons trigger alerts.
•
Under General » Tones » Alarms you can switch vibrations on and off.
You can select from the following options:
Vibration: vibration alert
•
Tones: sound alert
•
Both: both vibration and sound alert.
•

3.4. Bluetooth connectivity

Suunto 9 Peak uses Bluetooth technology to send and receive information from your mobile
device when you have paired your watch with the Suunto App. Same technology is also used
when pairing PODs and sensors.
However, if you do not want your watch to be visible for Bluetooth scanners, you can activate
or deactivate the discovery setting from the settings under CONNECTIVITY » DISCOVERY.
The Bluetooth can also be completely turned off by activating airplane mode, see 3.5.

Airplane mode.

3.5. Airplane mode
Activate airplane mode when needed to turn off wireless transmissions. You can activate or
deactivate airplane mode from the settings under Connectivity.
NOTE: To pair anything with your device, you need to first turn off airplane mode if you
have it on.

3.6. Do Not Disturb mode

The Do Not Disturb mode is a setting that mutes all sounds and vibrations and dims the
screen, making it a very useful option when wearing the watch in, for example, a theater or
any environment where you want the watch to operate as usual, but silently.
To turn on/off the Do Not Disturb mode:
1. From the watch face, keep the middle button pressed to open the shortcuts menu.
2. Swipe up or press the lower button to scroll down to the Do Not Disturb mode.
3. Tap the screen or press the middle button to confirm your selection.
12