Sony DSC-F717 Operating Instructions (primary manual) Operating Instructions Manual page 98

Symptom
You cannot display a print
(DPOF) mark.
Computers
Symptom
You do not know if the OS
of your computer is
compatible.
You cannot install the
USB driver.
Your computer does not
recognize your camera.
You cannot copy images.
The image cannot be
played back on a
computer.
98
Cause
• You cannot display print (DPOF) marks on
moving images and Clip Motion images.
Cause
—
—
• The camera is turned off.
• The battery level is low.
• You are not using the supplied USB cable.
• The USB cable is not connected firmly.
• [USB CONNECT] is set to [PTP] in the SET UP
settings (except Windows XP and Mac OS X).
• The USB connectors on your computer are
connected to other equipment besides the
keyboard, the mouse, and your camera.
• The USB driver is not installed.
• The camera is not correctly connected to your
computer.
• You are not using the correct copy procedure for
your OS.
—
—
—
Solution
—
Solution
p Check "Recommended computer environment" (pages 81 and
90).
p In Windows 2000, log on as Administrator (authorized
Administrators) (page 81).
p Turn on the camera (page 15).
p Use the AC power adaptor (page 14).
p Use the supplied USB cable (page 84).
p Disconnect the USB cable, and connect it again firmly. Make
sure that "USB MODE" is displayed on the screen (page 84).
p Set it to [NORMAL] (page 112).
p Disconnect the USB cables except for the ones connected to the
keyboard, the mouse, and your camera.
p Install the USB driver (pages 82 and 90).
p Connect the camera and your computer correctly using the USB
cable (page 84).
p Follow the designated copy procedure for your OS (pages 85, 86
and 91).
p If you are using the "PIXELA ImageMixer for Sony"
application software, click on HELP.
p If you are using the "PIXELA ImageMixer for Sony"
application software, click on HELP.
p Consult the computer or software manufacturer.