Installing the USB driver
• When using Windows XP, you need not install
the USB driver.
• Once the USB driver is installed, you need not
install the USB driver.
a Start up your computer, and
insert the supplied CD-ROM
into the CD-ROM drive.
Do not connect your camera to
your computer at this time.
The title screen appears. If it does not
Computer) t [ImageMixer] in that
b Click [USB Driver] on the title
The "InstallShield Wizard" screen
c Click [Next]. When the
"Information" screen appears,
The USB driver installation starts.
When the installation is completed, the
screen informs you of completion.
d Click [Yes, I want to restart my
computer now], then click
Your computer restarts.
Installing "Image Transfer"
• You can use the "Image Transfer" software to
copy images to your computer automatically
when you connect the camera to your computer
with the supplied USB cable.
a Click [Image Transfer] on the
Select the desired language,
then click [OK].
The "Welcome to the InstallShield
Wizard" screen appears.
• This section describes the English screen.