Safety And Care Information - Sirius XM RAdio SXBR3 Installation & User Manual

SXBR3 Business User Guide

Safety and Care Information

IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or
damage to your device. Sirius XM Radio Inc. disclaims all responsibility for damage from data loss
due to breakdown, repair, or other causes.
• Do not expose to extreme temperatures (above 140°F or below -4°F, or above 60°C or below -20°C).
• Do not expose to moisture. Do not use device near or in water.
• Do not let any foreign matter spill into device.
• Do not store in dusty areas.
• Do not expose to chemicals such as benzene and thinners. Do not use liquid or aerosol cleaners. Clean
with a soft damp cloth only.
• Do not expose to direct sunlight for a prolonged period of time, and do not expose to fire, flame, or
other heat sources.
• Do not try to disassemble and/or repair device yourself.
• Do not drop your device or subject it to severe impact.
• Do not place heavy objects on device.
• Do not subject device to excessive pressure.
• If the screen is damaged, do not touch the liquid crystal fluid.
WARNING!
• Opening the case may result in electric shock.
• Make sure that you insert the plug all the way into the outlet.
• Do not touch the device with wet hands.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other.
When the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
• This product contains chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.
• This device should be unplugged from the AC outlet during a thunder
and lightning storm, and when the device will not be used for an
extended period of time.
• Use the power plug to disconnect the device from the power source. To
begin using the device again, reconnect it to an AC outlet.
• Connect the device to an easily accessible AC outlet, so that the device
can be quickly disconnected, if necessary.
Introduction
5