Sight openings:
All. pressure
PS
Sight opening
S
All. temperature range on the
"remote indicator" body and on
TS
the indicator valve
5.2 Type of connection
Standard
: Flanges according to DIN
On request
: flanges according to ASME
Buttwelding end according to DIN or ASME
5.3 Materials
Parts in contact with the medium: C steel or stainless steel according to DIN or ASME.
Pressure holding components: C steel or stainless steel according to DIN or ASME.
5.4 Application limits
Max. all. pressure PS
Max. all. temperature TS
5.5 Corrosion resistance
The safety of the unit is not influenced by corrosion if it is used as intended.
5.6 Identification plate / Marking
The following data are indicated on the identification plate according to EN 19:
IGEMA GmbH
Mess- und Regelsysteme
Antwerpener Straße 1
Germany – 48163 Münster
* marking depending on the realization
A
D
Date of manufacture
B
E
Type of unit
C Max. all. Pressure
F
10-50
[bar]
470
(on request)
[mm]
310 or 390
[°C]
[bar]
10-200
[°C]
40
G
Max. all. Temperature
Nominal pressure (not listed)
Nominal diameter
80-200
---
2 to 40
G TAG-Nr. (optional)
13