Numerical Entry; Password Input - Example; Programming Of Min. And Max. Level - Igema DLT2 Installation And Operating Instructions Manual

6.3 Numerical entry

The digit in the segment where the dot is flashing can be changed by the keys
The desired number is confirmed by "OK". Then the next place (segment with flashing dot) can
be entered.
For multi-digit numbers the numbers move to the left and, if need be, out of the display.

6.4 Password input - example

Under the menu item
Now in this example we enter the password
be changed and this is signalled by the flashing dot. With the
is confirmed with "OK".
Display: 
1 0. 0
The decimal point of the middle digit continues to flash. Here again with
digit of the password (2) and confirm. Now on the display you will see a
decimal point flashes. The grey field is the visible area of the display
Display: 
120.
The 3rd digit is a 3. It is set with
This completes the input. You are again in the corresponding submenu. The other submenu
items are now enabled.

6.5 Programming of min. and max. level

For programming the minimum or maximum levels it is necessary to move
to the fill level in the boiler (note thermal linear expansion!).
Caution
Go to the first fill level. It is unimportant whether you start with the min. or max. level.
Bring up the menu on the evaluator by pressing "OK". Select main menu
keys and press the "OK" button twice. You are now in menu item 2.1.. Here enter the password
"123" as in the description in Chap. 6.4.
Select the corresponding menu item
keys and press "OK".
Wait the duration of the damping (see menu 2.4.) and then press the
Go to the other fill level and repeat the programming.
The measuring range can be individually set almost (Y-100) over the whole measuring
probe length whereby the smallest permissible measuring range is 50 mm (see Installation
and Operating Instructions EC 8).
The smallest permissible distance between the two limit levels is 50mm!
On changes to one limit level it is sufficient to move to it and to program
the corresponding fill level (0% or 100%).
Caution
16
2.1. after confirmation with
"▲" and confirmed with "OK".
(2.2. or 2.3.) for the fill level reached using the
"OK" "0 0. 0"
a appears.
123 . It starts in the middle. The middle digit can
"▲"
"▲" und "▼".
key the 1. is selected. This
"▲"
you enter the next
1 2 0. and the right
"▲"
2. with the or
"▲"
or
"OK"
button.
"▼"
"▼"