Dinner Plate; Memory Function - Midea COUNTERTOP MWO User Manual

.
11 BEVERAGE
Beverage
(a) Press "
display, "1","2","3" cup will display in order. One cup is about
120ml. For example, press "
Start/+30sec.
(b) Press "
the buzzer sounds five times and then will return to waiting state.
.
12

DINNER PLATE

Dinner Plate
( a) Press "
display, "250","350","500" g will display in order.
For example, press "
Start/+30sec.
( b) Press "
the buzzer sounds five times and then will return to waiting state.
.
13 PIZZA
Pizza
(a) Press "
display, "100","200","400" g will display in order.
For example, press "
Start/+30sec.
( b) Press "
the buzzer sounds five times and then will return to waiting state.

14. MEMORY FUNCTION

0/Memory
(1) Press "
(2) If the procedure has been set, press "
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "
turn back to the waiting states.If press "
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting state, press "
Time Cook
b.Press "
Power
c. Press "
Start/+30sec.
d. Press "
waiting state. If you press "
memory 2 and operated.
e. If the electricity is cut off procedure will need to be reset.
f. If you want to run the saved procedure, in waiting state, press "
Screen displays "2", then press "
" repeatedly until the number you wish appears in the
Beverage
" to cook, buzzer sounds once. When cooking is finished
" repeatedly until the number you wish appears in the
Dinner Plate
" to cook, buzzer sounds once.When cooking is finished
" repeatedly until the number you wish appears in the
Pizza
" once , "100" appears.
" to cook, buzzer sounds once. When cooking is finished
" to choose memory 1-3 procedure. The LED will display 1,2,3.
0/Memory
" once,then press "3","2","0" in order.
" once,"PL10" display,then press "8" and "PL8" displays.
" to save the setting. Buzzer sounds once then turns back to
Start/+30sec.
" once , "1" appears.
" once , "250" appears.
Start/+30sec.
Start/+30sec.
" once to save the procedure and
Start/+30sec.
" twice, stop pressing until the screen displays "2".
" again, the procedure will be saved as
Start/+30sec.
" to run.
15
" to use it. If not, continue to
" again,it will start cooking.
0/Memory
" twice.