Advertisement
• Retry after breathing on your finger or wetting it to moisten your skin (when your
finger is too dry)
• Retry after drying your finger (when your finger is too wet)
• Wipe off dirt and dust from the sensor with a soft, dry cloth
• Try another finger
6. The [Select Finger] dialog box will appear. Click a finger you want to register. When
you select a finger, a small circle will appear at the top of the selected finger. Click
[Next].
7. The [Register Fingerprint] dialog box will appear. Follow the instructions in the dialog
box. You will be prompted to place your finger on the sensor 3 times. Every time your
fingerprint is scanned, the fingerprint image will appear. After 3 trials, the best
fingerprint image for registration will be selected. You will then be prompted to place
your finger one last time to verify the selected fingerprint image.
Training Your Puppy® Unit
Figure 2: Right index has been selected.
Figure 3: Successful registration.
Page 13
Advertisement
