Mode 2: Wet Pick Up Using Pump; Dry Vacuuming - Tennant V-WD-24P Operator's Manual

EN
PUMP
1. Connect the pump switch cord and the
receptacle on machine.
2. Connect the desired pump drain hose
3. Mount the camlock coupling at rear of
machine.
4. Connect the pump drain hose (not
drain hose to the draining area.
6. Using accessory tool, start picking up
liquids. The pump will automatically turn
keeping the tank empty.
AREA
1. Connect the pump drain hose (not
included) to rear of machine and route the
drain hose to the draining area.
2. Turn on the motor switch and pump switch.
pump will start emptying the tank.
4. Place the vacuum hose under the water
level in order to pick up only water.
pressure created inside the tank from the
pick up air mixture.

DRY VACUUMING

WARNING - This machine has been
designed to work as a wet & dry
vacuum cleaner. Dry operation is
allowed only with the optional dry kit
manual.
appliance, the device must be
correctly assembled. Check that all
10 TENNANT V-WD-24P
head and lock it by rotating it clockwise..
NO
4. Make sure the tank is dry, otherwise dry it
with a rag before inserting main polyester
Be careful that the bag does not cover the
top of the pump.