Use Of The Switched Receptacle; Use Of Squeegee Attachment Kit (Optional); Wet Vacuuming; Mode 1: Wet Pick Up - Tennant V-WD-24P Operator's Manual

USE OF THE
RECEPTACLE
only for connection of submersible
The switched receptacle is only designed
to the receptacle as shown.
switched receptacle
energized when turned ON
USE OF SQUEEGEE ATTACHMENT
KIT (OPTIONAL)
1.
clear of debris.
2. Connect the vacuum hose to the squeegee
assembly.
3. Loop the hose and attach it to the plastic
clip.
4. Lift foot pedal with toe to release squeegee
from raised position.
To obtain optimal drying performance,
Turn knobs counterclockwise to raise or
clockwise to lower blades.
SWITCHED 6. Turn the motor switch on.
7. Pull the machine backwards to pick up
8. Clean squeegee blades after each use.

WET VACUUMING

Pump restrictions
- Solids Handling ½"
-
and is
valve closes suction.
every use.
to do so may result in fatal electrical shock.
1. Turn the motor switch on.
2. Using the accessory tool, pick up liquids
4. Remove tank drain hose from holder, twist
snug to prevent suction loss.
liquid.
when machine is not in use to prevent
blade set.
Do not leave the machine unattended
Soil can deposit and lead to
malfunctions. Pump clear water or
thoroughly rinse the pump after
damages and replace it if necessary
power source before performing
maintenance on the pump. Failure
hose securely while draining due to
high pressure water force.
suction.
TENNANT V-WD-24P
EN