Omega i Series User Manual page 39
Temperature/process limit controller
Hide thumbs
Also See for i Series:
- User manual (73 pages) ,
- User manual (72 pages) ,
- User manual (43 pages)
Table of Contents
Advertisement
Example 3:
Setpoint 1 = 300,
Setpoint 2 = 200
Alarm 1 & 2 Setup: Deviation, Band, "ALR.H" = 10
Color Display Setup: "N.CLR" = Green, "1.CLR" = Amber, "2.CLR" =
Red
Display Colors change sequences:
AMBER | AMBER | AMBER | G REEN | AMBER
• -------------- • ------ • ------ • -------------------------------- • ------- • ------- • -------------------
0 190 200 210 290 300 310
Alarm 1 is designed to monitor the Process Value around the
Setpoint 1. Alarm 2 is designed to monitor the Process Value around
the Setpoint 2.
Example 4:
Setpoint 1 = 200
Setpoint 2 = 200
Alarm 1 Setup: Deviation, Band, "ALR.H" = 20
Alarm 2 Setup: Deviation, Hi/Low, "ALR.H" = 10, "ALR.L" = 5
Color Display Setup: "N.CLR" = Green, "1.CLR" = Amber, "2.CLR" =
Red
Display colors change sequences:
AMBER | RED | GREEN | G REEN | RED | AMBER
• ------------------ • --------------- • -------------- • ------------- • ------------- • -------------------
0 180 195 200 210 220
Reset: The instrument automatically resets after the last menu of the
Configuration Mode has been entered. After the instrument resets, it
advances to the Run Mode.
35
Advertisement
Table of Contents
