Advertisement
Basic System Commissioning
▪
Reset Function – No need to turn power Off and On again to restart
Press and hold "ESC" and "Delete" for 5 seconds to reset the module controller
▪
▪
When reset is required?
▪
▪
After reset, all of LCD segment turn Off and turn On again then tracking procedure starts.
Press together for 5 seconds.
After hardware setting change (ex. Option switch) or
Module Controller
communication wiring change.
NOTE: Refer to the MCM-A00N IOM's
for all of the installation, setup and
functions of the Module Controller
57
Advertisement
