Audio Source Selection; Track Information Display; Random Track Reproduction; Track Repetition - Fiat 500L 2013 Owner's Handbook Manual

NOTE Not all Bluetooth® devices enable to scroll
the information on the tracks. To consult the list of
audio Bluetooth® devices and supported functions,
visit the www.fiat.it website (for Italy) or the
www.fiat.com website (for other countries) or call
Customer Service on 00800.3428.0000 (the number
may vary depending on the country: please refer to
the reference table in the "Customer Service number
list" paragraph herein).
Press the "Browse" button to activate this function
on the source being played.
Turn the BROWSE ENTER (7-fig. 1) button/knob to
select the desired category and then press the
button/knob to confirm the selection.
Press the "X" button to cancel the function.
NOTE The indexing time of a USB device can vary
according to the media inserted (in some cases it can
take a few minutes).

AUDIO SOURCE SELECTION

Press the "Source" button to select the desired audio
source among those available: CD, AUX, USB/iPod or
Bluetooth®.
If no source is selected, the screen disappears after a
few seconds and the display shows the main screen
again.

TRACK INFORMATION DISPLAY

Press the "Info" button to show on the display the
information on the track being listened to for devices
that support the function.
Press the "X" button to exit the screen.

RANDOM TRACK REPRODUCTION

Press the ">" button then the "Shuffle" button to play
the tracks on CD, USB/iPod or Bluetooth® in
random mode.
Press the "Shuffle" button again to deactivate the
function.

TRACK REPETITION

Press the ">" button then the "Repeat" button to
activate the function.
Press the "Repeat" button again to deactivate the
function.
367