Fiat 500L 2013 Owner's Handbook Manual page 61

MONO BUTTON
Press the MONO button (LED on button lit) to align
the passenger side air temperature with that of the
driver side.
This function makes temperature regulation easier
when the driver is travelling alone.
Turn knob L to set the passenger side temperature
and return to separate air temperature management.
AIR RECIRCULATION
The air recirculation is managed according to the
following operating logics:
❒ forced activation (air recirculation always on):
indicated by the LED on button B
❒ forced deactivation (air recirculation always off, air
intake from the outside), signalled by the LED on
button B switching off.
Forced activation/deactivation can be selected by
pressing button B .
When button is pressed, the climate control
system automatically activates internal air
recirculation (LED on button B
It is still possible to activate outside air recirculation
(LED on the button off ) and vice versa, by pressing
button B .
In automatic operation, recirculation is managed
automatically by the system according to outside
environmental conditions.
IMPORTANT The engagement of the recirculation
system makes it possible to reach the required
heating/cooling conditions faster. It is, however,
inadvisable to use it on rainy/cold days as it would
considerably increase the possibility of the windows
misting up inside (especially if the climate control
system is off ). When the outside temperature is low,
recirculation is forced off (air drawn in from the
outside) to prevent the windows from misting up.
;
could mist up rapidly.
on)
It is inadvisable to use internal air
recirculation when the outside
temperature is low, since the windows
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
57