About the Product
Component List
Mounting bracket x 1
No. 8 wood screws x 2
Cable holder x 1
(For charging connector version)
Recommended Tools and Accessories
The following tools are recommended for the installation of product:
Recommended Tools
Torque wrench
Electro drill for masonry walls.
Phillips #3 screwdriver for securing cable holder.
Torx T20 screwdriver for securing front cover and middle cover.
Torx T30 screwdriver for securing mounting bracket.
As securing mounting bracket, using Phillips #2 screwdriver for wooden walls or 10mm Hex
wrench for masonry walls.
Terminal crimper for input wire.
1-3
Mounting template x 1
Torx T30 mounting bolts x 4
Key for key switch x 2
Component List
User manual x 1
1/4 inch expansion bolts x 2
Installation and Operation Manual