Troubleshooting - Delta AC MAX Installation And Operation Manual

Troubleshooting

Troubleshooting
Contact Customer Support if the product appears to malfunction or if the LED indicators display a fault
event. DO NOT open the product, touch or remove the circuit protective devices or any other compo-
nent.
Situation
Indicator does not light
Indicator does not flash after
plugging charging connector
Indicator starts to flash in red
while charging
Indicator illuminates in red
1-13
1. Make sure the power input is connected correctly and the power
is within operating range of the unit.
2. Power cycle the product.
3. If the problem persists, contact Customer Support.
1. Check if the charging connector is fully inserted to EV
2. Check if the battery is full on EV
3. If the problem persists, contact Customer Support.
1. Wait until the temporary error is resolved and the product returns
to normal condition, typically less than 10 seconds.
2. Unplug the charging connector.
3. Power cycle the product.
4. If the situation persists, contact Customer Support.
1. It might be a critical error (e.g. hardware fault).
2. Unplug the charging connector.
3. Power cycle the product.
4. If the situation persists, contact Customer support.
Status Indicator
Action
Installation and Operation Manual