Specifications - Delta AC MAX Installation And Operation Manual

Specifications

Model
Charging mode
Charging interface
Input/Output rating
Input wiring
Standby power
Altitude
Internal residual current
detection
Surge protection
Electrical protection
Cold load pick-up
Status indicators
Buttons/Switches
Operating temperature
Storage temperature
Humidity
Cable length
Ingress protection
Impact protection
Cooling
Dimension (H x W x D)
Net weight
Compliance/certificate
Installation and Operation Manual
Mode 3
IEC 62196-2: Type 1 plug, Type 2 plug, Type 2 socket, and Type 2 socket
with shutter
208-240 Vac, single-phase, 32 A max., 50 Hz

380-415 Vac, three-phase, 32 A max., 50 Hz

L1, N, and PE or L1, L2, and PE for single-phase

L1, L2, L3, N, and PE for three-phase

< 2.6 W
4000 m
DC 6 mA, AC 30 mA
Class II
Over current protection, short circuit protection, over voltage protection,
under voltage protection, ground fault protection, surge protection, over
temperature protection
Randomized delay between 5 and 100 seconds before the charge resume
after power outages.
Blue, yellow, green, red
Key switch
-30ºC to +50ºC (-22ºF to +122ºF)
-40ºC to +80ºC (-40ºF to +176ºF)
< 95% related humidity, non-condensing
5 m, straight cable
IP55 for indoor and outdoor
IK10
Natural cooling
371 x 218 x 167 mm (14.6 x 8.6 x 6.6 inch), excluding charging cable,
mounting bracket and cable holder
3.9 kg
CE mark
Basic
14
Specifications