Installation and Operating Instructions
Installation Steps
Mark Drill Holes
Figure 5. Template for Marking Drill Holes
Secure Mounting Bracket
1. The cable holder is optional and depicted in the following figure for demonstration purposes.
The following are recommended bolt types:
Masonry walls: 1/4" expansion bolts.
Torque: 8.8 N·m (78 lb·in)
Finished walls supported by wood studs: #8 wood screws of 2" or above screw length.
Torque: 3 N·m (26 lb·in)
Figure 6. Installing a Mounting Bracket in a Masonry or Finished Walls Location
1-7
The product is a stationary wall-mounted
equipment. It includes a wall mounting template
to mark the screw locations for the mounting
bracket and cable holder (optional).
Installation and Operation Manual
Installation Steps