Page 1
72” Hex Table Assembly Instructions Model #s: B264040, B264042, B2331053 CONTENTS Assembly Instructions Ref. Qty. Description Ref. Qty. Description Customer Service US: 1-800-645-2986 Pre-Assembled Support Arms Base Anchor Supports Blocks Left Seats Hardware Pack* Right Seats *Contains: (6) 2 1/2" Hex Lag Screws (30) 3 1/2"...
Page 2
Step 3 Align the pre-drilled holes in the seats and support arms, attach using 3 1/2" hex lag screws and flat washers. Installation Tip: Seats may fit tigthly side by side, tilt the seats up slightly as you tighten lag screws to pull them down flush against the support arms.
Page 3
Step 7 With two people, carefully lift the table top and position the slots in the top underside frame with the three (3) uprights. Slide the top down onto the uprights. Ensure each upright is fully engaged in the slot and the top is resting even and level. Step 8 Attach each upright to the table top using a 3 1/2"...