Advertisement
Page 3 of 3
B
A
Step 7
With two people, carefully lift the table top and position the slots
in the top underside frame with the three (3) uprights. Slide the
top down onto the uprights. Ensure each upright is fully engaged
in the slot and the top is resting even and level.
Step 8
Attach each upright to the table top using a 3 1/2" hex lag
screw and flat washer, tighten fully. Hex head should be
within the countersunk hole. Attach all three (3) support arms
to the base uprights at the pre-drilled holes using a 3 1/2"
hex lag screw and flat washer.
As of 10/2019
Advertisement
